Where is the serial number on a John Deere 9500 combine?

Where is the serial number on a John Deere combine?

Combine serial number is located on the left-hand upright in back of the tool box as stated by phoyofarm. The engine serial number is located on the front of the engine block above the starter.

Where is the serial number on a John Deere engine?

Where is My John Deere Engine Serial Number? As we mentioned, you can locate your ESN on a plate in your engine. This tag is most frequently found attached to one side of the engine or another.

What engine is in a John Deere 9500 combine?

The John Deere 9500 model is equipped with a six-cylinder diesel engine that is turbo charged and capable of 190 horsepower. John Deere increased the horsepower to 200 for the 1990 model year.

How tall is a John Deere 9500 combine?

Height is 13 ft. 5 in. to bin auger, cab height is 12 ft. 9 in. with 30.5 tires, width is 15 ft. to outside ladder.

IT IS INTERESTING:  Quick Answer: What is Baler Aurora known for?

How do I decode a John Deere serial number?

Identify the next four letters and numbers after the factory code, which will be positions three to six in a 13-symbol VIN, or positions four to seven in a 17-symbol VIN. This is the model number. For instance, in the John Deere VIN CD6068G123456, 6068 is the model number.

How do you tell the year of a tractor serial number?

The 8th digit of the tractor identification number corresponds to the tractor’s model year. To determine the model year, locate the 8th digit of your identification number and compare it to the appropriate table below. The 8th digit of the number is 1.

How do I find my John Deere product identification number?

Your John Deere model number can be located in one of several different locations depending on your equipment type. While the model number is usually printed in yellow letters on the outside of your equipment, it can also be found on the bottom of the product identification tag (marked in red in photo).

What do John Deere Model numbers mean?

The tractor model numbers are comprised of four positions. The first number designates the family while the next three numbers represent the approximate engine horsepower. The fifth and sixth positions are represented by a letter. … The second position is the tractor’s approximate engine horsepower.

How do you read engine serial numbers?

Your serial number is located on your engine plate, often located on the left-hand side of the engine. Typically the first letters and numbers will identify the engine, for example, DJ51279, to find all the parts we have online for your engine.

IT IS INTERESTING:  Frequent question: What do you do with fan leaves after harvest?

What years did John Deere make the 9500 combine?

About The John Deere 9500

John Deere released the walker-based 9500 combine harvester in 1989 along with the smaller 9400 model and the 9600 combine. Discontinued in 1997, the 9500 had a pressurized, center-aligned cab up front designed to prevent dust inhalation.

How much horsepower does a s660 combine have?

ENGINE

Engine type 9.0 L/548 cu in.
Rated speed 2,200 rpm
Rated power 239/249 kW/320/333 hp
Power boost @ rated speed 25 kW/34 hp
Fuel capacity 950 L/250 gal.

How much does a John Deere 9600 combine weight?

Transporting John Deere 9600 Combine

This John Deere was 24 feet long, 12 feet wide, 12 feet high and 26,800 pounds.

How many bushels does a John Deere 9600 hold?

Its a best guess estimate while harvesting. My 9600 will hold 200 bushels of clean beans plus the 2% or so dirt, pods etc.

How tall is a John Deere 9400 combine?

John Deere 9400 Dimensions

Dimensions
Wheelbase: 137.8 inches 350 cm
Width: 172 inches 436 cm (duals)
Height (cab): 137.5 inches 349 cm
Ground clearance: 28.8 inches 73 cm (axles)

How wide is a John Deere 9600 combine?

Technical specs – 9600 John Deere

Engine power 460 kW
Brakes S
Travel speed 40 km/h
Transport length 6 m
Transport width 3 m
Construction brigade