What year was the Ford 8N tractor made?

It was released in October 1939. The 2N, introduced in 1942, was the 9N with some improved details. The 8N, which debuted in July 1947, was a largely new machine featuring more power and an improved transmission. By some measures the 8N became the most popular farm tractor of all time in North America.

How do I tell what year my Ford 8N tractor is?

To determine the year of a Ford 8N tractor, the serial number must be located and then compared to a list of serial numbers used by Ford for each of the years in which the tractor was manufactured. Locate the serial number imprinted on the Ford 8N tractor.

What is a 1952 Ford 8N worth?

Around here you can get a pretty good 8n for $2500 or so, a little less for a tinkerer, more for restored. Big thing is the rear tires, new set runs around $700 so figure that in to purchase price.

IT IS INTERESTING:  How fast is a John Deere lawn mower?

How much did a Ford 8N tractor cost new?

Ford 8N

Production
Manufacturer: Ford
Factory: Highland Park, Michigan, USA
Total built: 524,000
Original price: $1,404 (1952 )

What is the difference between 8N and 9n Ford tractor?

They really are basically the same. Only major differences are a couple horsepower, 8n has 4 speed trans and 9n has 3 speed trans. 8n is newer than the 9n and has more hp. Newer 8n have side distributor older 8n’s and 9n’s had front distributor.

How do you read a Ford 8N serial number?

The best way to identify a tractor is by the serial number. Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The hundred series and “01” series tractor serial number location is on the flat area above and behind the starter.

How do you tell the year of a tractor serial number?

The 8th digit of the tractor identification number corresponds to the tractor’s model year. To determine the model year, locate the 8th digit of your identification number and compare it to the appropriate table below. The 8th digit of the number is 1.

Is a Ford 8N a good tractor?

The Ford 8N is the standard of reliability, built to last for generations. While these tractors do require occasional maintenance, there are no significant design flaws that would make this tractor unreliable. These tractors are easy to work on.

How fast is a Ford 8N?

A 1952 Ford 8N tractor dubbed the “8NCREDIBLE” is reported to have taken the title of world’s fastest farm tractor, reaching a speed of just over 96 miles per miles per hour and breaking a record that has stood for 81 years.

IT IS INTERESTING:  What month is corn ready to harvest?

Does 8N have live PTO?

Supporting Member. One disadvantage of the Ford N’s was, they are not Live pto and Live hydraulic. When you push the clutch in, they stop. The mower stops mowing and if it was raised, it lowers to the ground.

Can a Ford 8N run a tiller?

TILLER: The ‘N’ tractor WILL NOT RUN A TILLER! Unless the tractor is equipped with a rare Howard or Everett auxiliary transmission. The ground speed is simply too fast without it.

How many Ford 8N tractors were built?

Over 530,000 units of 8N were sold worldwide; the Fordson Model F had sold over 650,000 units worldwide, but in North American sales the 8N surpassed it in popular acclaim and units sold.

Does Ford still make tractors?

Today, Ford is still the only major auto maker in this country with its own line of tractors, although Ford’s annual tractor sales of about $1.3 billion are dwarfed by its automotive sales of nearly $50 billion.

Is a Ford 9N a good tractor?

The short answer is yes. The 9N is one awful tractor to work compared to an 8N, NAA or later. Not only do you don’t get position control and live hydraulics like on the 8N, both the clutch and left wheel brake are on the left, meaning with the clutch depressed you can only use the right brake.

What engine is in a Ford 8N tractor?

Ford 8N Engine

Engine Detail
Ford
liquid-cooled
Displacement: 119.7 ci 2.0 L
Bore/Stroke: 3.188×3.75 inches 81 x 95 mm

When did they stop making Ford tractors?

Henry Ford and Harry Ferguson.In 1928, Fordson tractor production was halted in the United States, only to be resurrected in 1939 as the Ford Model 9N.

IT IS INTERESTING:  Which riding lawn mower engine is the best?
Construction brigade