What does SVC mean on my John Deere lawn mower?

If an arrow with “SVC” has appeared in the lower left-hand corner, pointing to the left, the computer is alerting you that engine service will be necessary soon. A similar arrow will appear in the lower right-hand corner, pointing to the right, if mower deck service is necessary soon.

How do you reset the service light on a John Deere e120?

Turn the ignition key to the “Run” position, but do not start the engine. Leave the key in this position for two hours, then turn the ignition key to the “Stop” position and remove the key. The service timer will reset and come on when the next service interval is reached.

How do you reset the service interval on a John Deere 6125m?

Member

  1. Press the menu button.
  2. Select Performance Monitor.
  3. Select Performance Monitor Settings softkey.
  4. At Performance Monitor page go to Service Alarm Interval box, and select it.
  5. Adjust service interval [If using thumb wheel, rotate thumb wheel forward or rearward to change hour setting displayed.] .
IT IS INTERESTING:  Best answer: How much is daily harvest cost?

11.01.2015

How do you bypass the reverse safety switch on a John Deere lawn mower?

Locate the reverse safety switch near the same side as the battery on your John Deere mower. There will be a plastic wire harness with wires. Grasp the wire harness and press down on the side tabs with your thumbs then pull them apart to unplug it.

How do you reset the service light on a John Deere lawn mower?

Turn the ignition key to the “Run” position, but do not start the engine. Leave the key in this position for two hours, then turn the ignition key to the “Stop” position and remove the key. The service timer will reset and come on when the next service interval is reached.

How do you reset the code on a John Deere?

Press “SELECT” to scroll through the codes until “END” appears on the display. Press “SELECT” again, “WAIT” will be displayed on the screen. Hold “SELECT” for 5 seconds to clear all John Deere diagnostic codes from the system. When cleared, “END” will appear on the display.

When should I service my John Deere mower?

Yearly or Every 100 Hours (Whichever Comes First)

Change engine oil and filter (Service more frequently under dusty conditions). Replace air filter element(s) (Service more frequently under dusty conditions).

How much does it cost to service a John Deere lawn mower?

John Deere Models: LA100s, D100s STX, Scotts, Sabre, LT, LX, X300s, Z200 & Z400s,GT, GX, Husqvarna LTH, YTH, GTH and Other Makes of Small Lawn & Garden Tractors up to 54″ Mower Decks.

Lawn & Garden Tractor Packages.

IT IS INTERESTING:  Quick Answer: What is the most comfortable riding zero turn mower?
Pick Up & Delivery
5 – 10 Miles $60.00
10 – 15 Miles $70.00
10 – 20 Miles $80.00

How much does it cost to service a John Deere riding mower?

Dealers typically charge more than $200 for routine lawn mower maintenance (like John Deere tractor service) that includes an oil change and new spark plugs and filters.

How long does a John Deere riding lawn mower last?

They are a decent machine, with proper maintenance they should last 10–15 years at 4 hours a week usage in the summer.

How do you mow in reverse on a John Deere riding lawn mower?

How to Go Into Reverse on a John Deere LA115

  1. Come to a complete stop.
  2. Locate the RIO button on the controls area beneath the steering wheel.
  3. Press in on the RIO button and hold it down. …
  4. Release the RIO button and drive the mower in reverse.

How do you bypass the safety switch on a lawn mower?

How to Bypass Seat Safety Switch on Lawn Mower?

  1. Step 1: Set the Mower on Flat Ground. …
  2. Step 2: Disconnect the Battery Terminal. …
  3. Step 3: Get Access to the Seat Safety Switch. …
  4. Step 4: Take off the Safety Switch Wires. …
  5. Step 5: Cut the Wire & Tape Them. …
  6. Step 6: Take the Seat Back to Its Position.
Construction brigade