|John Deere 48 Loader|
|Loader weight:||1220 lbs 553 kg|
|Reach at ground:||68 inches 172 cm|
|Breakout force (lift):||3600 lbs 1632 kg|
|Lift to full height (at pin):||2400 lbs 1088 kg|
What tractors will a JD 146 Loader fit?
The 146 loader was designed for 4 cylinder utility tractors ( 2020, 2030, 2440, 2630 etc) with straight front axles.
What is John Deere load match?
LoadMatch is a standard feature of the eHydroTM transmission. The LoadMatch switch is located on the left side of the steering column. Activating this switch will automatically match the output of the transmission to the load on the tractor.
How much horsepower does a John Deere 3020 have?
It has a wheelbase of 90 inches, and a fuel capacity of 29 gallons. It was offered with three different engine options including a 3.7L 4-cyl gasoline engine, a 4.4L 4-cyl diesel and a 3.7L 4-cyl LP gas engine all produced by John Deere. The 3020 was rated at 71 horsepower.
Is a John Deere 3020 a good tractor?
3020 is a good tractor. Have had a 3010 several years with little to no issues. Four bottom plow and 10-12′ disc (depending on type) are good sized implements, and as Wolc said – more than needed for an 8′ disc. If that’s your max load a smaller tractor might work better.
Who makes loaders for tractors?
Koyker Manufacturing has front end loaders for all major tractor brands, including: John Deere, Kubota, McCormick, New Holland and Case IH. Koyker loaders are designed, engineered and built in the USA. All Koyker loaders come with a 2 year warranty.
What does a John Deere 148 loader fit?
Attachments. Adding a loader to your utility tractor will allow you to tackle a wide variety of jobs, such as carrying soil, gravel, mulch, firewood, garden supplies, as well as snow. The John Deere loader 148 is an attachment designed to fit several models of John Deere farm and agricultural tractors.
What is load match?
LoadMatch is an online free freight load board that makes it possible for freight brokers, motor carriers and shippers to match loads, trucks and equipment for inland transportation in North America. … The result is reduced backend costs, improved transportation management and running equipment at full capacity.
What does E Hydro mean?
E-hydro means an electronically controlled hydrostatic transmission.
What is John Deere E throttle?
The eThrottle feature is designed make the tractor quieter and use less fuel. With the simple push of a button, the engine speed will be linked to the pedal position. … The engine rpms as well as the tractor speed will increase together with the pedal position. NOTE: Available on the 4520 and 4720 Tractors only.
What is the difference between a John Deere 4010 and 4020?
4020 engines are bigger. 4020 has a better PTO speed change. The 4010, both front and rear PTO are the same speed as selected by the bolt on stub (which if it comes loose can cause a lot of damage). The 4020 the front PTO always runs 1000 rpm and the spline insert changes only the rear PTO speed.
What is the most popular John Deere tractor?
The most popular John Deere Tractor Models are John Deere 5310, John Deere 5050 D, John Deere 3028 EN, John Deere 5105, and many more.
How much horsepower is a 4020 John Deere?
The 4020 Diesel has a six-cylinder engine tested at 84 drawbar and 91 PTO horsepower. John Deere’s Syncro Range transmission with 8 forward speeds and two reverse speeds was standard, a power shift transmission was optional.
How much does a 3010 tractor weigh?
The John Deere 3010 tractor has a category 2 three point hitch, and weighs 5,800 pounds.
How much oil does a John Deere 3020 hold?
John Deere 3020 Engine
|Oil capacity:||9 qts 8.5 L|