What is the best older square baler?
Probably the most popular older JD’s are the 336 and 346. 336 was a smaller capacity than the 346 and would more than do what you want. Personally I use two of them and we run about 20K a year through them with out much trouble. There is nothing on these balers that cannot be repaired if you know what you are doing.
How much horsepower does it take to run a small square baler?
A small square baler NH 271 or older, or JD T14 or T24 take about 15 hp to keep running. Also takes about 10 hp to pull it. Also takes about 5 hp to pull a hay rack.
How much does a square hay baler cost?
For harvesting 4-foot-by-5-foot round bales, estimated new equipment costs are $25,000 for a rotary mower/conditioner, $5,500 for a 10-foot rake, $35,000 for the baler and $55,000 for an adequate-sized tractor.
What should I look for in a used baler?
What to look for when inspecting a used baler for sale.
- Check the serial number and odometer. The first process is verifying the serial number on the unit you are inspecting. …
- Pay attention to baler details. …
- Undercarriage and suspension. …
- Monitors. …
- Maintenance log and supporting documentation.
Is a New Holland 310 a good baler?
Overall functional performance of the New Holland 310 baler was very good. Average feedrates varied from 2 to 8 t/h (2.2 to 8.8 ton/h). … The New Holland 310 was capable of producing firm, well formed bales. Length of the 356 x 457 mm (14 x 18 in) bales could be adjusted from 305 to 1320 mm (12 to 52 in).
How does a small square baler work?
Operation of a Small Square Baler
Directly behind the pickup is the compressor bar, which holds the hay in place so the auger can feed it into the bale chamber. The bale chamber contains a plunger that drives in and out, each time packing and compressing hay into the desired shape.
How many bales is a lot for a round baler?
Most round balers can easily get 6 or 7000 bales before breaking even one belt, and most round balers can put through at least 30,000 bales before needing complete belt replacement.
How much horsepower do you need to run a round baler?
If you are buying a baler first, keep horsepower requirements in mind when pairing with a tractor. PTO horsepower requirements for round balers start at 30 hp and can run up to 120 hp.
How much horsepower do you need to run a Haybine?
being sensible here– you need at least 50 hp + a tractor with good brakes to do the job safely. I run a 488 with a series 4 D17 Ac diesel loaded rear tires and still get pushed around some on the steep hills.
How much does a 50 lb bale of hay cost?
From the hay market, square bales, on average, will cost you between $3 and $10 per bale, but some farmers prefer selling their hay per pound, in which case such a bale will be around 50 pounds.
How much does a small square bale of hay cost?
Small square bales averaged $4.60 a bale (range of $2.00 to $6.00). Large square bale straw averaged $64.00 per bale (a range of $40.00 to $90.00). Large round bale straw averaged $58.00 per bale (a range of $40.00 – $85.00). In Nebraska, hay sold steady, demand is light in 2020.
How many pounds of hay is in a square bale?
A standard two-string square hay bale weighs between 40 and 75 pounds; a three-string square bale weighs over 100 pounds, and some as much as 140 pounds; the average round hay bale weighs about 1,250 pounds, but their weight varies greatly from 563 to 1,584 pounds.
What is a good small square baler?
In my opinion the Inlines (hesston, agco, mf, cat) are the best all around machine out there. They are much more consistent, less leaf loss, easier to work on, much more maneuverable, easier to transport and just make a good looking bale.
Should I buy a round baler?
Round balers tend to be more economical than medium to large square balers for both beef and dairy mid-sized farms. … The heavier duty silage balers are better able to handle baleage without breakdowns and will generally produce better bales.
How do I get the last bale out of a square baler?
Take tension off bale and pull it out by the twine. Let it set overnight if it won’t come out with thesion on it and it will hold it’s compressed shape the next day. Then loosen tension and it should come out. Will heat in the baler if not perfectly dry.