Are you supposed to drive a forklift backwards?
“It would be, in my opinion, a very dangerous way to drive a forklift for a long period of time,” Iunker said. Driving in reverse while looking backward would cause the steering wheel to move more than intended, making it very hard to control, he added.
When moving the forklift in reverse you must?
When should you drive a forklift in reverse?
- Always. Travel slowly when moving down slopes.
- Speed. Ensure the forks face uphill when traveling up or down slopes with a load because this ensures stability and prevents the load from falling off the fork arms. …
- Load. …
- No Load. …
In what situation are you most likely to need to drive a forklift in reverse?
If the load is too large to see clearly over the top of the load, move the load by driving backwards. Forklift drivers must also drive backwards when going down or up an incline.
Do you drive a forklift with both feet?
You should have two feet and a hand or two hands and a foot in contact with the vehicle at all times. … Ensure that all operating surfaces are capable of supporting your vehicle, your load, and yourself before operating the forklift.
Why do forklifts have 3 pedals?
To begin with, every forklift comes equipped with an accelerator and a brake pedal. … That third pedal is called an Inching Brake. Its function is twofold. It initially acts as a brake and secondly disengages the transmission, allowing the engine speed to increase or decrease without affecting the drive of the forklift.
Why do Forklifts drive backwards?
Large loads on the forks can sometimes obscure operator vision, making it necessary to drive backwards for maximum visibility. When driving down a hill with a load, operators must often drive in reverse to keep loads from slipping off the forks and to maintain stability.
How low should forks be driving forklift?
When driving a forklift typically in a warehouse the forks should be above the ground at a height of 6 to 8 inches, approximately the same height that will go through a wooden pallet. If you scrape the floor surface, your forks are too low.
How high should your forks be when driving forklift?
Keep the forks 6 to 10 inches above the ground to avoid potential hazards on the ground. Remember that forklifts are top-heavy. Carry the load low and tilted back.
How soon should repairs be made to a forklift?
The more you use your forklift, the more often you should have it serviced by a factory trained technician. A forklift that gets heavy use might require a forklift maintenance visit every 90 days. Be sure to keep a copy of the items inspected on file in case OSHA requests that information.
How do you drive a forklift uphill?
Avoid steep slopes. Make sure the load always points uphill. When going down a slope, be careful about the load falling off. Always drive with a lift “forks first” down a hill or slope (this puts more weight on the braking wheels, so the driver has more traction)
What is the most common cause of a forklift accident?
17 Sep The Most Common Forklift Accidents:
Now, the most common types of a forklift accident are when one overturns, when a worker is stuck, pinned-beneath, or crushed by a forklift, or when a worker falls from a forklift. An overturning forklift is a terrifying scenario.
How do you drive a forklift down a ramp?
When going down a ramp, drive in reverse with the load and keep the forks pointed up the slope. When traveling without a load, the forks should always point down the slope. The forklift operator should also drive in reverse up the ramp or drive forward when going down the ramp.
Do and don’ts of forklift?
The 5 Dos and Don’ts of Forklift Safety
- Do Drive Responsibly. Just like driving a car on the road, you should always operate your forklift at a speed that will allow you to stop safely. …
- Don’t Go Over Your Forklift’s Load Capacity. …
- Do Be Aware of Pedestrians. …
- Don’t Skimp on Training. …
- Do Maintain Your Forklift.
What should you not do while operating a forklift?
- Do not lift or move a load unless both forks are fully under the load.
- Do not lift a load with one fork. Use pallets and skids that can withstand the weight of the load.
- Do not use damaged, deformed or decayed pallets for holding loads.
Is forklift driving hard?
Driving a forklift isn’t all cake, roses, and gas pedals. It’s going to be hard work. … Operating a forklift is considered a “hazardous occupation,” according to the Fair Labor Standards Act. As with any big machine, accidents happen.