Who is directly responsible for the safe operation of the forklift?
The operator has prime responsibility for preventing accidents and injuries at all times.
When operating a forklift what must you do?
Stay Safe While Using A Forklift
Ensure both forks are as far under the load as possible before lifting. Drive with the load as low as safely possible. Pay attention to posted speed limits and warning signs. Always look in the direction you’re traveling; if a load blocks the view ahead, travel in reverse.
Which safety precaution applies to forklifts?
Forklift operators should be dressed with the appropriate safety equipment, including safety shoes, hard-hats, and a high-visibility jacket. Make sure to tuck away loose clothing to prevent it from getting caught on the forklift.
What are forklift regulations?
OSHA 29 CFR 1910.178(I) requires that employers provide forklift operators training for vehicle inspection and maintenance. Operators must be over 18 years of age and be recertified at least once every three years. The similar CSA standard is B335-04 (R2012).
Who has the right of way in warehouses?
OSHA states the pedestrian has the right of way; therefore, operators must be on constant alert. The forklift operator is required to slow down and sound their horn at doorways, intersections, blind spots and when entering or exiting a building.
Can I drive a forklift without a Licence?
A licence isn’t essential to drive a forklift truck, but there are a few requirements that you must meet in order to safely operate one. Age – the HSC Approved Code of Practice and Guidance states that anyone of minimum school-leaving age (16) can start driving a forklift truck.
What should not be done when operating a forklift?
Do not grab the overhead guard when traveling in reverse. Doing so could expose the operator’s finger to serious injury. Never turn on a grade or with the forks elevated. Do not carry passengers.
What can you not do with a forklift?
Forklift operators should never:
- Raise or lower loads while the forklift is moving and especially not while turning because it makes the forklift very unstable. …
- Allow anyone to stand underneath or right next to raised forks. …
- Carry a load with only one fork as it stresses the carriage.
What is the minimum safe distance to drive behind another forklift?
Falling distance of an object from a pallet or 15 feet, 5 Feet both sides, 5 Feet Rear of Forklift. do so (ALL CLEAR). Do not pass under the forks while in operation. in operation and a fix object.
What is your duty of care while operating a forklift?
It is the companies responsibility to ensure the equipment staff are using is in safe and serviceable condition. Part of this Duty of care includes the operator inspecting the forklift prior to use. A checklist is one of the most common methods companies use to monitor and measure equipment serviceability.
What are the types of forklifts?
10 Common Forklift Types, Classifications and Uses
- Warehouse Forklift.
- Side Loader.
- Counterbalance Forklift.
- Industrial Forklift.
- Rough Terrain Forklift.
- Pallet Jack.
- Walkie Stacker.
Why is forklift safety important?
It keeps workers safe
There are higher chances of sudden accidents while operating forklifts, particularly if a person does not have proper safety training. Proper forklift safety training is an ideal means to minimize fatalities.
What are the 7 classes of forklifts?
The 7 Classes of Forklift Trucks
- Class 1: Electric Motor Rider Trucks.
- Class 2: Electric Motor Narrow Aisle Trucks.
- Class 3: Electric Motor Hand or Hand-Rider Trucks.
- Class 4: Internal Combustion Engine Trucks—Cushion Tires.
- Class 5: Internal Combustion Engine Trucks—Pneumatic Tires.
What does LPS stand for on a forklift?
The label “LPS” indicates that the truck is LPG-fueled, that it meets the requirements of “LP”, and that it is equipped with components that can protect its electrical system, fuel system, and exhaust system from the environment.
What distance must you keep from an operating forklift?
For example, even at six kilometres an hour (i.e. walking pace) a forklift needs at least three metres to stop. The distance at which a forklift can stop is affected by: • the speed at which it is travelling • the weight of its load • its mechanical and tyre condition • the road surface.