When should you use braking to stop a lift truck?

If a forklift is going 4 mph, it’s going to need about 17 feet or more to stop. The driver will usually travel about 7 feet before he or she has time to apply the brakes (and that’s assuming that the driver is paying close attention to his surroundings, which is not usually the case).

When you stop a lift truck by braking you should?

10 Why should you travel with the forks of your forklift as low as possible? 11 When you stop a forklift by “braking”, you should: a. Release the deadman pedal quickly.

When stopping a lift at the end of your shift What should you do?

Lower the forks until they are flat on the floor

IT IS INTERESTING:  You asked: How long do forklift certifications last?

Make sure that the forks touch the ground when you are leaving. Apply the parking brake when it is the idle position. All operational controls of the truck must be in the neutral position before the driver alight the forklift compartment.

How many feet does it take to stop a forklift?

A forklift truck at 10 mph = 40 feet to stop. A forklift truck at 10 mph = 40 feet to stop.

How should you drive when a tall load obstructs your vision?

Travel in reverse when a load blocks your vision and always look in the direction of travel. Check for adequate overhead clearance when entering an area or when raising the forks.

When a lift truck is turning Is it more stable loaded or unloaded?

How should you raise the load? When a load is raised, the lift truck is less stable. … Attend the controls of the forklift truck when a load is elevated. In other words, the operator must stay on the forklift when the load is in a raised position.

Why should a lift truck not be turned on a ramp?

Driving Direction on Grades

This will help prevent the load from sliding off the forks. Never turn on a ramp or grade. Also, regardless of direction you should always travel with an unloaded forklift with the forks pointed downgrade. This will help improve braking and traction while descending or ascending the ramp.

How long does it take to stop a lift truck that is traveling at full speed answer?

It will take another 10 feet for the forklift to come to a full-stop. If the forklift is going 8 mph, the distance jumps to 42 feet. At a speed of 9 mph the distance jumps up to 51 or more feet.

IT IS INTERESTING:  Quick Answer: What is the difference between a scissor lift and a boom lift?

When parking a lift truck you should?

  1. Select an area to park. Do not park in an unauthorized area. Do not block an aisle or exits. Follow your company’s parking procedures.
  2. Apply brake slowly and stop.
  3. Neutralize the controls.
  4. Set the parking brake.
  5. Turn off the ignition.
  6. If the truck is parked on an incline, block the wheels.

What is the best thing to do if your lift truck starts to tip over?

If the forklift is tipping over, protect yourself by staying put:

  1. Stay in your seat and do not attempt to jump off.
  2. Lean away from the falling direction of the lift.
  3. Hold onto the steering wheel and make sure you’re stable.

How far should you stand from a forklift?

The safe traveling distance between forklifts is approximately three truck lengths, or about a time-lapse of three seconds when passing the same point. More specifically, it’s about 20 feet between forklifts. The three-second rule is the same for automobiles on the road and is just as important for forklifts.

Who has the right of way in most warehouses?

OSHA states the pedestrian has the right of way; therefore, operators must be on constant alert. The forklift operator is required to slow down and sound their horn at doorways, intersections, blind spots and when entering or exiting a building.

What will make the load more stable during travel?

When traveling with a load, always make sure to tilt the mast of the forklift backward so that the load will firmly place against the backrest to make it more secure during transport. By doing this, you move the center of gravity towards to rear of the forklift making it more secure when traveling.

IT IS INTERESTING:  Question: Where do we hoist our national flag?

How many pallet lengths should you leave for a safe stopping distance?

According to OSHA 1910.178(n)(1), A safe distance shall be kept about three truck lengths. That length is about 20 feet away from each other and that the traffic rule shall be followed including the workplace’s speed limit.

When picking up a load it should be tilted?

Do not tilt a forklift forward with a load with the forks elevated except when a load must be picked up. When stacking a load, tilt the mast backward to stabilize it. When working with a maximum capacity load, tilt the mast backward and position the load, so the heaviest part is against the carriage.

What is the minimum safe distance to drive behind another forklift?

Falling distance of an object from a pallet or 15 feet, 5 Feet both sides, 5 Feet Rear of Forklift. do so (ALL CLEAR). Do not pass under the forks while in operation. in operation and a fix object.

Construction brigade