When on foot How much distance should someone be from the operator of a forklift?

The safe traveling distance between forklifts is approximately three truck lengths, or about a time-lapse of three seconds when passing the same point. More specifically, it’s about 20 feet between forklifts. The three-second rule is the same for automobiles on the road and is just as important for forklifts.

What is the distance that I keep away from a forklift?

Pedestrian exclusion zones should be enforced within a three metre radius of a forklift. This distance should expand when the height of the forklift load or the speed travelled increases.

Who has the right of way when driving a forklift?

OSHA states the pedestrian has the right of way; therefore, operators must be on constant alert. The forklift operator is required to slow down and sound their horn at doorways, intersections, blind spots and when entering or exiting a building.

IT IS INTERESTING:  Frequent question: What is the time for Flag Hoisting?

What is the area of risk when operating a forklift?

5. Floor Conditions. The surrounding work area presents several potential forklift dangers. Debris, puddles, unstable ground and other floor obstructions can cause falls or overturns if not immediately taken into account.

What will make the load more stable during travel?

When traveling with a load, always make sure to tilt the mast of the forklift backward so that the load will firmly place against the backrest to make it more secure during transport. By doing this, you move the center of gravity towards to rear of the forklift making it more secure when traveling.

When parking or leaving the forklift you must remove the ignition key?

Turn off the engine and the key should be removed

Aside from turning off the engine, and you know you will be away for a longer period, removing the key from the ignition and handing it over to your shift supervisor in case someone wants it to be used during that period is good practice as well.

Who has the right of way the largest forklift?

Operators should yield the right of way to pedestrians: This is an OSHA recommendation that all forklift drivers should be aware of. Because of the size and power of the forklift, operators should stop and wait for pedestrians to clear the area before proceeding along their route with caution.

Does a forklift exiting an aisle has right away?

The forklift exiting an aisle in a warehouse has the right of way. The forklift exiting an aisle in a warehouse has the right of way. FALSE. This answer has been confirmed as correct and helpful.

IT IS INTERESTING:  What can a forklift lift?

How often should operators inspect their forklift?

Federal OSHA requires that forklift vehicles have to be inspected at least daily, or after each shift when used around the clock. You will find this requirement in the Powered Industrial Truck standard at 1910.178(q)(7).

What are 3 fluid levels that need to be checked before using the forklift?

Check of liquid Levels:

  • Hydraulic fluid.
  • Brake fluid.
  • Engine oil coolant.
  • Battery.
  • Fuel.

20.04.2011

What are the 4 main causes of injuries when using forklifts?

4 Common Causes of Forklift Operator Injury or Death

  • Lift trucks are inadvertently driven off loading docks.
  • Lifts fall between docks and an unsecured trailer while a worker in onboard.
  • Workers (or pedestrians) can be struck by a lift truck.
  • Trucks may fall while on elevated pallets and tines.

4.03.2019

What is the most common forklift accident?

17 Sep The Most Common Forklift Accidents:

Now, the most common types of a forklift accident are when one overturns, when a worker is stuck, pinned-beneath, or crushed by a forklift, or when a worker falls from a forklift.

When a lift truck is turning Is it more stable loaded or unloaded?

How should you raise the load? When a load is raised, the lift truck is less stable. … Attend the controls of the forklift truck when a load is elevated. In other words, the operator must stay on the forklift when the load is in a raised position.

What is the best way to handle an uneven load?

Tilt the load against the backrest. If the load is unstable, lift the load slightly first, then carefully tilt it back so that the load stays tight against the backrest. If it’s a stable load and secure on the pallet, tilt first, then lift. Once the load is lifted, lower it to a safe traveling height.

IT IS INTERESTING:  Best answer: Do forklifts have the right of way?

How much back tilt is required when transporting a palletised load?

Apply sufficient back tilt to cater for the type of load and ground conditions when transporting a palletised load. Never use the full range of tilt with the forks raised laden or un-laden (100-150mmm).

Construction brigade