What should you never do when carrying a load on forklift?

Avoid standing or walking under a load, lifting mechanism, or forklift attachment, as loads can fall off on anyone positioned below it. Keep hands and feet clear away from the forklift mast, as a moving mast can cause serious injury.

What can you not do with a forklift?

When you are driving up or down a ramp, do not make a turn. This could cause the forklift to flip. Finally, never sit on the load itself. You could fall off, cause the load to drop, or overload the forklift and damage its mechanisms.

Which steps should you follow to safely lift an object with the forks on a forklift truck?

Do not raise or lower the fork unless the lift truck is stopped and braked. Lift loads straight up or tilt back slightly. Do not lift a load that extends above the load backrest unless no part of the load can possibly slide back toward the operator. Attend the controls of the forklift truck when a load is elevated.

IT IS INTERESTING:  What class is a sit down forklift?

Which of the following are safe work practices when using forklifts?

Stay Safe While Using A Forklift

Ensure both forks are as far under the load as possible before lifting. Drive with the load as low as safely possible. Pay attention to posted speed limits and warning signs. Always look in the direction you’re traveling; if a load blocks the view ahead, travel in reverse.

What is the most common forklift accident?

17 Sep The Most Common Forklift Accidents:

Now, the most common types of a forklift accident are when one overturns, when a worker is stuck, pinned-beneath, or crushed by a forklift, or when a worker falls from a forklift.

What are the 3 pedals on a forklift for?

There are three types of forklift pedals: accelerator, brake, and clutch. A typical forklift has all three pedals present, but there are exceptions. For instance, some forklifts have an inching pedal that is used to disengage the lift’s transmission and slow down the machine or bring it to a complete stop.

When traveling with a load the load should be lifted 5 inches?

On a flat floor, lower them until they are 2 to 5 inches above the floor. On rough terrain, lift the forks higher to accommodate uneven ground.

When picking up a load the correct fork spacing should be?

Answer Expert Verified. When picking up a load, the correct fork spacing must be spaced in an evenly manner in which the centre stringer of the pallet and the balance of the load should be spaced evenly in which makes the picking up the load to be correct and well-balanced.

IT IS INTERESTING:  Question: Why do forklifts run on propane?

Which steps should you do every time you park a forklift?

Parking Safety Rules

  1. Always try to find a level surface to park on. …
  2. Lower forks, or the forklift attachment, all the way to the ground. …
  3. Put the gear into neutral.
  4. Make sure the wheels are straight. …
  5. Set the parking brake every time you park the forklift. …
  6. Turn off the engine before dismounting the forklift.

Where can I not park a forklift?

Do not park an industrial lift truck near doorways, switches and electricity boards, fire fighting equipment, blind corners, on inclines, on soft ground, middle of an aisle, fire exits or pedestrian walk ways.

What happens when a forklift is overloaded on the tip of the fork?

Deadly Danger # 1—Forklift Turnovers

Forklifts can easily tip if they are overloaded, if the load is not well balanced, or if they travel with the forks too high. How it can happen: A forklift operator was killed when his forklift overturned when he was turning while backing down an incline.

Where should the heaviest part of the load be?

Keep the load close to the waist

Keep the heaviest side of the load next to the body. If closely approaching the load is not possible, try to slide it towards the body before trying to lift it.

What are the 7 classes of forklifts?

The 7 Classes of Forklift Trucks

  • Class 1: Electric Motor Rider Trucks.
  • Class 2: Electric Motor Narrow Aisle Trucks.
  • Class 3: Electric Motor Hand or Hand-Rider Trucks.
  • Class 4: Internal Combustion Engine Trucks—Cushion Tires.
  • Class 5: Internal Combustion Engine Trucks—Pneumatic Tires.
IT IS INTERESTING:  What does a forklift technician do?

What is the most common type of forklift?

The most popular forklift types on the market today are:

  • Counterbalance Forklift.
  • Telehandler.
  • Industrial Forklift.
  • Rough Terrain Forklift.
  • Pallet Jack.
  • Walkie Stacker.
  • Order Picker.
  • Reach Fork Truck.

10.09.2018

Which side of the forklift is supporting more weight?

Weight distribution refers not only to the weight of the load, but also the weight of the forklift itself. An empty forklift has most of its weight in the rear, but when a load is placed on the lift, the weight distribution moves forward.

Construction brigade