What is the first thing you should do before setting off on a route with your forklift?

When setting a load What should you do first?

How should you raise the load?

  1. Check that the overhead clearance is adequate before raising loads.
  2. Do not raise or lower the fork unless the lift truck is stopped and braked.
  3. Lift loads straight up or tilt back slightly.

What steps should be done before using forklift?

The first step toward safe forklift operation is conducting the preoperational inspection. Forklift operators should conduct the inspection at the start of each work shift to ensure that the forklift will work properly. According to OSHA, 1 in 15 forklift-related accidents are caused by improper maintenance.

What should the operator do before reversing a forklift?

When reversing the forklift, always do so slowly. It’s easy to lose control at speed, especially if the load you’re carrying is very heavy or bulky. Be sure to sound your horn before you reverse to alert pedestrians and other vehicular traffic of your presence.

IT IS INTERESTING:  Quick Answer: Are scissor lifts considered aerial lifts?

What is a required step in properly parking a forklift?

When parking a forklift, slowly bring the vehicle to a stop, set the parking brake, turn off the ignition and remove the keys. If you are parking on an incline, turn the front wheels away from the downgrade so the forklift will not slide.

What are six important steps to remember when lifting an object?

Safe lifting tips Healthy body

  • Think before you lift. Plan the lift. …
  • Keep the load close to the waist. …
  • Adopt a stable position. …
  • Ensure a good hold on the load. …
  • Do not bend your back when lifting. …
  • Do not bend the back any further while lifting. …
  • Do not twist when you lift. …
  • Look ahead.

Which is the correct way to access the load?

Keep the load close to the body for as long as possible while lifting. Keep the heaviest side of the load next to the body. If a close approach to the load is not possible, try to slide it towards the body before attempting to lift it. Avoid twisting the back or leaning sideways, especially while the back is bent.

What are 3 fluid levels that need to be checked before using the forklift?

Check of liquid Levels:

  • Hydraulic fluid.
  • Brake fluid.
  • Engine oil coolant.
  • Battery.
  • Fuel.

20.04.2011

Why do forklifts have 3 pedals?

To begin with, every forklift comes equipped with an accelerator and a brake pedal. … That third pedal is called an Inching Brake. Its function is twofold. It initially acts as a brake and secondly disengages the transmission, allowing the engine speed to increase or decrease without affecting the drive of the forklift.

IT IS INTERESTING:  Your question: How long does it take to climb a tower crane?

What three guards are fitted to a forklift?

One final passive safety feature is the overhead guard. In the unlikely event that part of the load falls off of a raised pallet, the overhead guard is designed to protect the operator from small objects. The overhead guard is constructed to a very high standard and is an integral part of the forklift’s design.

What is the most common forklift hazard?

Some of the most common forklift accidents include overturns, struck with a forklift and falls from a forklift. Luckily, all of these forklift hazards are things employees can avoid with some vigilance and preparedness prior to and during operation.

What is the distance that I keep away from a forklift?

Pedestrian exclusion zones should be enforced within a three metre radius of a forklift. This distance should expand when the height of the forklift load or the speed travelled increases.

When parking or leaving the forklift you must remove the ignition key?

Turn off the engine and the key should be removed

Aside from turning off the engine, and you know you will be away for a longer period, removing the key from the ignition and handing it over to your shift supervisor in case someone wants it to be used during that period is good practice as well.

Where can I not park a forklift?

Do not park an industrial lift truck near doorways, switches and electricity boards, fire fighting equipment, blind corners, on inclines, on soft ground, middle of an aisle, fire exits or pedestrian walk ways.

What should you do if you are driving through an area and your view is blocked?

The driver must look in the direction of, and keep a clear view of, the path of travel. [29 CFR 1910.178(n)(6)] The driver must slow down and sound the horn at cross aisles and other locations where vision is obstructed.

IT IS INTERESTING:  Do propane forklifts have fuel filters?
Construction brigade