Scissor lift operators must hold a valid license – without exception. If an operator uses a lift without a license, he or she can expose their employer to myriad risks. In the aforementioned scenario, an unlicensed scissor lift operator risks costly and dangerous accidents.
Can anyone use a scissor lift?
Yes, you do. Scissor lifts can be dangerous and can cause accidents leading to personal injuries as well as structural and equipment damage. Current regulations state that all personnel who work with or near scissor lifts must be trained and licenced.
Do I need a Licence to operate a scissor lift UK?
The Health and safety legislation (height regulations 2005) in the UK require that states that any job that requires a scissor lift or a boom lift must be operated by some one who is competent using a MEWP or Mobile Elevated Work Platform such as a scissor lift.
Is scissor lift high risk?
What are the risks when using scissor lifts? Scissor lifts are a safe and reliable means of reaching areas that would otherwise be inaccessible – as long as operators are properly trained in the safe use of the equipment and aware of the hazards in the area.
Does OSHA require you to be certification for scissor lift?
Employers must provide workers training on hazards, including how to work safely with or near scissor lifts. [29 CFR 1926.454] Training must, at a minimum, include: The correct procedures (e.g., the manufacturer’s instructions) for operating the scissor lift vertically and while in transit.
How many people can go on a scissor lift?
Most electric scissor lifts will have a lifting capacity of around 200kgs which should allow for x2 average sized workers. Some larger rough terrain scissor lifts can have lift capacities upwards of 600kgs, allowing for 6 average size workers.
What do I need to operate a scissor lift?
Participants must hold a current EWPA Yellow Card Operator Licence for a Scissor Lift (SL). They must have this on their person during the practical assessment.
Can you exit a scissor lift at height?
In particular, §1926.501(b)(1) requires fall protection at 6 feet above a lower level. A worker may enter or exit an aerial lift (at heights above 6 feet) provided that fall protection such as guardrails or a fall arrest system is used while the worker moves between the lift and the working surface.
Do you need a spotter for a scissor lift?
Until standardisation of control mechanism is achieved, Scissor Lifts are not to be operated unless there is a person on the ground operating as a Spotter. The spotter must be available at all times to activate the emergency lowering mechanism should that be necessary.
How much is it to hire a scissor lift?
Choose from our fleet for vertical access of heights from 8m to 22.5m. We’ve got the equipment for every requirement. Scissor hire from £65 per week.
Is a spotter required for a scissor lift?
A spotter, who must be a qualified operator, is required when the MEWP is operating in an area with minimal clearance or where hazards are present. … On a vertical-only work platform with guardrails, such as a scissor lift, use of a fall arrest system is not required unless recommended by the manufacturer.
Can you use a ladder on a scissor lift?
Buckets, step stools, or ladders should never be used in a scissor lift as a way to gain extra height to reach work surfaces. … According to the Occupational Safety and Health Administration (OSHA), this usually rules out moving the lift in an elevated position.