Question: What is the biggest danger when driving a forklift on a dock?

Even though they’re moving at slower speeds than conventional vehicles, forklifts can still skid on wet, icy, or oily dock surfaces or dock levelers. A slippery dock area can also cause moveable dockboards to shift out of place, which can be dangerous when heavy lift trucks are driving over them.

What is the most common forklift hazard?

Some of the most common forklift accidents include overturns, struck with a forklift and falls from a forklift. Luckily, all of these forklift hazards are things employees can avoid with some vigilance and preparedness prior to and during operation.

What is the safety precautions used in docks?

To protect against trailer creep, experts recommend the use of wheel chocks or vehicle restraints to keep the trailer secure against the dock. In addition, worn or defective trailer landing gear, designed to keep trailers level and secure when not attached to a vehicle, can present a significant hazard.

IT IS INTERESTING:  You asked: What principle describes hydraulic lifts?

What are the dangers of forklifts?

Dangers of Forklifts

  • Forklifts are heavy. …
  • Forklifts can move at speeds of up to 18 miles per hour.
  • Forklifts are harder to stop, as they only have one set of brakes, located in the front of the vehicle. …
  • The weight of a forklift is unevenly distributed, which makes it harder to operate and drive.

What are the 4 main causes of injuries when using forklifts?

4 Common Causes of Forklift Operator Injury or Death

  • Lift trucks are inadvertently driven off loading docks.
  • Lifts fall between docks and an unsecured trailer while a worker in onboard.
  • Workers (or pedestrians) can be struck by a lift truck.
  • Trucks may fall while on elevated pallets and tines.


Can a forklift kill you?

The average forklift weighs several thousand pounds. As a result, 16 percent of forklift fatalities occur when victims are crushed by the vehicle. How it can happen: An electric-line technician was crushed to death after falling from and being run over by a forklift. The technician was riding on the forks.

What are 3 fluid levels that need to be checked before using the forklift?

Check of liquid Levels:

  • Hydraulic fluid.
  • Brake fluid.
  • Engine oil coolant.
  • Battery.
  • Fuel.


What are the big forklifts called?

The industrial forklift—also called a large capacity forklift—combines the functionalities of a warehouse forklift with that of a telehandler. While it can’t reach difficult angles the way that a telehandler can, it is capable of lifting payloads much higher off the ground than a warehouse forklift and heavier loads.

What is the OSHA color code for loading dock edges?

To be as safe as possible, the visual barrier needs to be prominent. The barrier should be a bright color. Yellow is preferred because it’s the international safety color indicating “warning.” To be productive around busy docks, the visual barrier should be able to be installed and removed as quickly as possible.

IT IS INTERESTING:  You asked: Why are cranes left on top of skyscrapers?

What PPE is mandatory when working on the dock?

PPE is equipment that will protect the user against health or safety risks at work. It can include items such as life jackets, safety helmets, gloves, eye protection, high-visibility clothing, safety footwear and safety harnesses. It also includes respiratory protective equipment (RPE).

What does the forklift sign mean?

Warning sign – watch out forklift operating area

A warning sign is used to indicate warning of a hazard or hazardous condition that is not likely to be life-threatening. This warning sign features the text watch out forklift operating area in large letters below a large pictogram.

What is a 3 stage forklift?

What is a 3 stage forklift? 3-Stage – A three-stage mast, or triplex, is the most versatile forklift mast and also the most popular. The outer rails allow for free lift, and the two inner sections can lift loads higher than a two-stage.

How can I improve my forklift safety?

Here are five tips for improving forklift safety in facilities of any size.

  1. Offer Forklift Safety Training. …
  2. Check for Hazards Before Operating. …
  3. Keep Employees Safe While Operating a Forklift. …
  4. Use Floor Marking to Keep Workers Safe. …
  5. Improve Safety Throughout Your Facility.

What are the main causes of using a forklift?

What factors can contribute to forklift trucks incidents?

  • Travelling at excessive speed.
  • Riding with the load elevated.
  • Improper backing up techniques.
  • Improper turning, braking or accelerating.
  • Improper warnings to others about a forklift in use nearby.
  • Poor communication during shared tasks, or in shared spaces.

What accidents could occur when a forklift truck is parked?

Gravity is one of the biggest dangers to forklift operators. Parking on a ramp, incline, or on an uneven surface can cause the forklift to roll on its own. If the surface is steep enough, the vehicle’s parking brakes may not be enough to stop it from rolling.

IT IS INTERESTING:  Question: How do you calculate the turning radius of a forklift?

How many forklifts died in 2019?

Safety Topics

Forklift-related injuries are also cross-categorized by event type, most often as either a transportation incident or contact with object or equipment incident. Forklifts were the source of 79 work-related deaths and 8,140 nonfatal injuries involving days away from work in 2019.

Construction brigade