Scissor lifts are mobile supported scaffold work platforms used to safely move workers vertically and to different locations in a variety of industries including construction, retail, entertainment and manufacturing.
What is scaffold lift?
LIFT: The vertical distance from the supporting surface to the lowest ledger of a scaffold or level at which a platform can be constructed. Also, the vertical distance between adjacent ledgers or levels of a scaffold at which a platform can be constructed.
Is an aerial lift considered a mobile scaffold?
There are numerous types of “lifts” used in industry, and it can be confusing for employers. Per OSHA, a scissor lift is a mobile scaffold for which the platform only moves vertically. An aerial lift is any vehicle-mounted work platform that can move vertically and/or horizontally.
What OSHA standard do scissor lifts fall under?
(29 CFR 1910.269; 29 CFR 1910.333; 29 CFR 1926 Subpart V). Employers must regularly maintain scissor lifts to ensure that they are safe to use (e.g., prevent the lifting mechanism from collapsing).
Is a scissor lift considered a powered industrial truck?
And what aren’t? According to the Occupational Safety and Health Administration, a powered industrial truck is: Any mobile power-propelled truck that is used to pull, push, carry, lift, stack or tier materials is a powered industrial truck.
Can scaffolding be permanent?
Experts say employees need to understand that scaffolds are not permanent structures and care must be taken when working on all stages of scaffolding – from their construction to the work that takes place on them.
Are scaffold swivels load-bearing?
The most common are called scaffold couplers, and there are three basic types: right-angle couplers, putlog couplers and swivel couplers. … Only right angle couplers and swivel couplers can be used to fix tube in a ‘load-bearing connection’. Single couplers are not load-bearing couplers and have no design capacity.
When a scaffold is being used a competent person must always be present?
Supported scaffolds consist of one or more work platforms that are held up by rigid supports, poles, legs, posts and frames, that are connected to the ground. for constructing and using scaffolds safely. — OSHA regulations require that a “competent person” be present on a scaffold worksite at all times.
Do you need a harness when using a scissor lift?
While OSHA does not require scissor lift workers to wear a harness or other PFRS, that doesn’t mean you shouldn’t. After all, there are many hazards associated with scissor lift use. That’s one reason OSHA requires scissor lifts to have guardrail systems.
Can anyone use a scissor lift?
Yes, you do. Scissor lifts can be dangerous and can cause accidents leading to personal injuries as well as structural and equipment damage. Current regulations state that all personnel who work with or near scissor lifts must be trained and licenced.
Can you put a ladder on a scissor lift?
Buckets, step stools, or ladders should never be used in a scissor lift as a way to gain extra height to reach work surfaces. … According to the Occupational Safety and Health Administration (OSHA), this usually rules out moving the lift in an elevated position.
Are Scissor car lifts safe?
That’s why most car enthusiasts have one of the lifts on this list and not a full-size two-post lift. … However, BendPak scissor lifts are some of the safest in the world, so getting one will not cause you to sacrifice much of anything (such as capability, safety and ease of use).
Are scissor lifts dangerous?
Scissor lifts can be especially dangerous if used improperly. … When aerial work platforms are used correctly, they are not dangerous. Often times they are set up on uneven ground that is not suitable for equipment that carries the risk of tipping.
Can you exit a scissor lift at height?
In particular, §1926.501(b)(1) requires fall protection at 6 feet above a lower level. A worker may enter or exit an aerial lift (at heights above 6 feet) provided that fall protection such as guardrails or a fall arrest system is used while the worker moves between the lift and the working surface.
Are pallet jack considered a powered industrial truck?
A powered industrial truck is defined by OSHA as any mobile power-propelled truck used to carry, push, pull, lift, stack or tier materials. Examples include fork lifts, pallet jacks, low lift jacks, etc.
What Is A Class 3 forklift?
Class 3: Electric Motor Hand or Hand-Rider Trucks
These are hand-controlled forklifts, meaning the operator is in front of the truck and controls the lift through a steering tiller. All controls are mounted on the top of the tiller, and the operator moves the tiller from side to side to steer the truck.