Is a scissor lift an EWP?

Does Ewp cover scissor lift?

For scissor lifts, this usually means an EWP Operator Ticket (Yellow Card). This covers the operation of platforms under 11 metres in height. If you’re operating platforms taller than 11 metres, you’ll need a WorkCover High Risk Work Licence issued for the state you’re in.

What are the 2 basic types of EWP?

There are many variations of EWP but they can be placed in one of two categories: Boom type or Scissor type. Vertical mast or personnel lifts come in two configurations.

Is a boom lift an EWP?

There are many variations of EWP but they can be placed in one of two categories: Boom type or Scissor type. Vertical mast or personnel lifts come in two configurations. Both elevate using a telescopic mast in a vertical direction only.

What is Ewp?

For the purposes of this learning guide an elevating work platform (EWP) is defined as: ‘A telescoping device, hinged device or articulated device, or any combination of these devices, which is used to support a platform on which personnel, equipment and materials can be elevated to perform work.

IT IS INTERESTING:  Is it better to lift or lower a truck?

Is a harness required when using a scissor lift?

While OSHA does not require scissor lift workers to wear a harness or other PFRS, that doesn’t mean you shouldn’t. After all, there are many hazards associated with scissor lift use. That’s one reason OSHA requires scissor lifts to have guardrail systems.

Can anyone use a scissor lift?

Yes, you do. Scissor lifts can be dangerous and can cause accidents leading to personal injuries as well as structural and equipment damage. Current regulations state that all personnel who work with or near scissor lifts must be trained and licenced.

Can you exit a scissor lift at height?

In particular, §1926.501(b)(1) requires fall protection at 6 feet above a lower level. A worker may enter or exit an aerial lift (at heights above 6 feet) provided that fall protection such as guardrails or a fall arrest system is used while the worker moves between the lift and the working surface.

How can I lower my EWP?

Pull handle to lower the platform. Great care must be taken to avoid collision or crushing as the platform lowers. Hand pumps can be fitted to both scissor and boom type platforms at the base of the machine, including trailer lifts and truck mounted platforms.

What do I need to know before using EWP?


  1. Checking of engine and hydraulic oil levels.
  2. Checking tyre inflation pressure and general condition of tyres.
  3. Checking of hydraulic hose system for leaks.
  4. Ensuring pipes and hoses are secure to prevent damage.


IT IS INTERESTING:  Quick Answer: What type of steel is used for forklift forks?

Do you have to wear a harness in an EWP?

This is a clear indication that providing the EWP is used and maintained as per the manufacturer’s recommendations, there is no requirement for a harness to be worn. The platform guard and hand rails are the primary source of fall protection for operators.

What is the difference between cherry picker and scissor lift?

Unlike scissor lifts, cherry pickers (also known as boom lifts) can offer ‘outreach’ due to extendable sections of the boom. … Booms can extend forwards, upward, out and over obstacles so don’t have to be parked directly below the target area unlike with scissor lifts.

Is a spotter required for an EWP?

Although it would be preferred that the spotter had an EWP ticket, this is not a requirement. However they must be trained in how to lower the EWP in the event of an emergency. The spotter is allowed to perform other duties while they are acting as a spotter.

Is Ewp high risk?

The following courses with us are High Risk Work licence courses: Dogging (Licence to perform dogging) EWP (Licence to operate a boom-type elevating work platform (boom length 11 metres or more)) Forklift (Licence to operate a forklift truck)

How do I submit an EWP EIU?

How do I submit papers to my EWP? All students — new freshmen and transfers and continuing native students — will submit documents electronically, and all faculty will be approving documents electronically. To begin the submission process, go to

Construction brigade