How tall is a forklift mast?

A typical two stage mast for a forklift with a capacity from 2,000 lbs. to 6,000 lbs. will have approximately 130″ of maximum lift and will be around 83-88″ Overall Height Lowered (OAHL). Two stage masts are very common in high capacity forklifts of 15,000 lbs. and up.

What is mast height in forklift?

Forklift Mast Types

Lift Height: (also known as maximum fork height or MFH) tells you how high the forks will be with the mast fully extended. When choosing a forklift mast, add at least six inches to the height of your topmost racking shelf.

How high does a quad mast forklift go?

All models include 48″ length forks, and longer forks are available upon request. This dual fuel forklift has a maximum lift capacity of 6,000 lbs. and a maximum lift height of 241”.

What is Mast type in forklift?

The forklift’s mast, or upright, is the portion of the forklift that lifts, lowers, and positions the loads manipulated by the forks. Each type of mast presents its own set of advantages for different applications depending on their height and stacking requirements.

IT IS INTERESTING:  Quick Answer: How much can a 50 tonne crane lift?

What is free lift height in forklift?

A forklift’s free lift is the maximum height you can raise the forks without changing the mast height. There are two instances where this typically happens: when the inner mast rails extends past the outer mast rails or when the load backrest or carriage exceeds the height of the outer mast rails.

How tall is a 3 stage forklift?

Three Stage Mast

This will raise the forks and carriage near the top of the mast prior to the sections staging up (known as ‘Free Lift’). Typical lift height for a triple stage mast for a forklift with base capacity from 2,000 lbs. to 6,000 lbs. will have 189″ of maximum lift and will be around 83-88″ OAHL.

What is mast height?

The mast of a sailing vessel is a tall spar, or arrangement of spars, erected more or less vertically on the centre-line of a ship or boat.

How heavy is a forklift?

The average automobile weighs approximately 3,000 lbs and the average forklift weighs close to 9,000 lbs.

How much does a forklift mast weight?

Common forklift weights:

Typical forklift weight ranges are between 4000 to 9000 lbs or 1800 to 4100 kg. Most forklifts used in a warehouse and distribution center weighs 3500 to 5000 lbs or 1500 kg to 2300 kg. Heaviest forklift is Kalmar DCG720-10LB forklift which weighs 204,600 lbs or 93500 kg.

How much can a Toyota forklift lift?

As a general rule, load center is 24″ from the face of the forks (the center point of standard 48” x 48” pallet). Forklift capacities range from about 3,000 lbs up to more than 70,000+ lbs.

IT IS INTERESTING:  How do I tell what year my Toyota forklift is?

What is a triplex mast?

A Triplex mast differs from the Duplex because it includes two sliding rails plus a single stationary rail: it is often found on a reach truck as it can extend a load further to reach greater distances. A large hydraulic ram in the center of the mast assembly performs most of the lifting of the forks and carriage.

Are forklift masts interchangeable?

Flash forward to today, and no one really exchanges masts between forklifts any longer. It can be done but it rarely is done. Dealers have large inventories, models of forklifts have some design differences that eliminate even the option of swapping forklift masts, and labor costs are high to swap the masts.

What is a low profile forklift?

Affordable and lightweight with a lifting capacity of 4000 pounds, this specialized low clearance unit adds value where other forklifts can’t. The Low Profile Series has standard features that include side shift, strobe light, smart backup alarm, and corrosion resistant features.

When should you drive a forklift backwards?

If a load on the forks blocks your view of the intended path of travel, travel in reverse. Always maintain a safe distance from the forklift ahead of you (about three truck lengths)

Is a telehandler a forklift?

Technically speaking, a telehandler is considered a (ITA*) class 7 powered industrial truck, which means it is a rough terrain forklift, but a forklift in name only.

What is a fulcrum on a forklift?

The Forklift Fulcrum

The fulcrum is the central pivot point of a seesaw. The front axle is the fulcrum of the forklift where the counterweight and the load find balance.

IT IS INTERESTING:  What is the top speed of a forklift?
Construction brigade