How do you transport a scissor lift?
Transportation methods, as with all MEWPs, are weight dependant. The smaller, lighter scissor lifts can be transported in box trailers, however, the bigger, heavier scissor lifts will need to be transported on a suitable plant trailer.
How do you move a scissor lift manually?
So as a general rule with a scissor lift, anytime you move it you should lower the lift all the way (or at least lower than 2 times the width of the base. So if your scissor lift is 4-feet wide, then the platform must be lower than 8 feet in order to move it.
Can you move a scissor lift with a forklift?
Never allow equipment other than the scissor mechanism to be used to raise the work platform (e.g., using a forklift to lift the work platform). Keep the lift from being struck by other moving equipment on the worksite.
Can you exit a scissor lift at height?
In particular, §1926.501(b)(1) requires fall protection at 6 feet above a lower level. A worker may enter or exit an aerial lift (at heights above 6 feet) provided that fall protection such as guardrails or a fall arrest system is used while the worker moves between the lift and the working surface.
How do you transport a genie lift?
Inspect the entire machine for loose or unsecured items. Make sure the jib and platform are in the stowed position. Secure the platform with a nylon strap placed parallel to the strap guides. Do not use excessive downward force when securing the boom section.
How do you put a scissor lift on a trailer?
Loading your Scissor Lift onto a Trailer
- 1 – Designate responsibility. …
- 2 – Clean your ramps. …
- 3 – Clear the area. …
- 4 – Line em’ up. …
- 5 – Load your scissor lift onto the trailer. …
- 6 – Chain/tie down your heavy equipment.
Can you drive a scissor lift while charging?
It is possible to operate the lift while it is being charged. Pull the red emergency shut off button out and have an assistant guide the AC extension cord away from the wheels while moving.
How long does it take to charge a Skyjack scissor lift?
All scissor lifts are slightly different, but the main rule of thumb is allowing your scissor lift to charge for at least 6 hours before you can get the full life out of it the next day. Scissor lifts are designed to be able to be used throughout the day and charged each night or every other night depending on usage.
Do you need to be tied off in a scissor lift?
Question 2: Are employees required to be tied-off when working on a guardrail-equipped scissor lift platform that extends beyond the wheelbase of the lift? Answer: No, neither §1926.451 or §1926.452(w) require employees to be tied-off when working from scissor lifts that have properly maintained guardrails.
Why you shouldn’t wear a harness in a scissor lift?
For instance, if a scissor lift operator is wearing a harness and goes over a lift’s guardrail, he or she could inadvertently create enough force to cause the machine to tip over. In this scenario, the operator could put himself or herself and bystanders in danger.
Do you need training to operate a scissor lift?
All MEWP operators are required to have training, regardless of how simple the machine is. … Mobile scissor lifts and mobile vertical personnel platforms. Self-propelled mobile boom lifts. Push around vertical lifts – including very simple push arounds.
What is the correct stopping distance when traveling on a scissor lift?
A: The length of time required to stop a forklift traveling at full speed varies based on the lift, its load, and other factors. Generally, forklift operators should maintain a distance of at least 20 ft.
Do scissor lifts tip over?
If the scissor lift isn’t properly secured, it can make the machine tip over, causing damage to the equipment and crew. Here are a few rules to follow to ensure your scissor lift doesn’t tip over: Always work on firm, level surfaces.
Is fall protection required on aerial lifts?
Employers must ensure that employees using personal fall arrest systems while working on aerial lifts at heights six feet or more above a lower level comply with §1926.502(d) of subpart M, specifically: … Use of a body harness with a lanyard (fall arrest system).