The first part of the forklift license test will most likely be a multiple choice (written test) and the second will be a driving test (practical test). Both parts of the test will contain all of the information you obtained while attending the training course.
How many questions are on the forklift test?
Nowadays, the forklift written test consists of twenty five questions consisting of five “open” questions where the candidate has to write the answers down and a further twenty questions which are still multiple choice. These in turn consist of ten questions relating to truck operation and ten related to safety.
What does the forklift test consist of?
For your forklift test, you will need to know to check your mirrors and use the horn. You have to be aware of your surroundings and your speed. You will also monitor foot traffic and load position. Everything requires your full attention.
How do I pass the forklift test?
10 Points You Need to Observe When Taking Forklift Practical Test
- Apply General Safety. …
- Signaling When Turning. …
- Slowing Down At Intersection. …
- Keeping Clear View. …
- Maneuvering and Traveling with Load. …
- Unloading. …
- Placing of Loads in Proper Places. …
- Safe Parking.
Can you fail a forklift test?
Forklift operator practical test penalties. … After the test they get added up by the instructor and the total must not exceed 40. If a trainee scores 41 or more they are deemed to have failed the test.
Is the forklift theory test hard?
Yes. Just an update (Oct 2012) for others on this as I’ve just completed the LF Forklift and LO Forklift tests at 2 different training companies and the theory test has been changed and is a lot harder. The theory test which is still written is now approx 66 questions of which you have to get at least a 90% pass mark.
Is forklift training hard?
To answer this question, No, it isn’t hard to get a forklift license even for an absolute novice with no prior operating experience. … A typical forklift training course is composed of classroom instruction and practical training. And the forklift course usually takes two days to complete.
When moving the forklift in reverse you must?
When should you drive a forklift in reverse?
- Always. Travel slowly when moving down slopes.
- Speed. Ensure the forks face uphill when traveling up or down slopes with a load because this ensures stability and prevents the load from falling off the fork arms. …
- Load. …
- No Load. …
What should not be done when operating a forklift?
Do not grab the overhead guard when traveling in reverse. Doing so could expose the operator’s finger to serious injury. Never turn on a grade or with the forks elevated. Do not carry passengers.
What areas on a forklift can cause injuries?
NIOSH states that the three most common types of injuries occur when: A forklift overturns; workers are struck, crushed, or pinned by a forklift; and workers fall from a forklift. With proper education and guidance from employers, the following accidents could have been prevented.
What is a forklift designed to do?
A forklift (also called lift truck, jitney, fork truck, fork hoist, and forklift truck) is a powered industrial truck used to lift and move materials over short distances.
What happens to the center of gravity when you lift a heavy load above the forklift?
Heavier loads shift the center of gravity forward even further. Raising the load also shifts the center of gravity forward. In order to prevent the lift from tipping, the combined center of gravity of the load and the lift must stay inside the stability triangle (at ground level) at all times.
What is the length of trucks on a forklift?
The safe traveling distance between forklifts is approximately three truck lengths, or about a time-lapse of three seconds when passing the same point. More specifically, it’s about 20 feet between forklifts.
Do forklift drivers make good money?
Additionally, we wanted to adjust the salary based on the cost of living in a state — because your salary goes further in North Carolina than it does in California.
Detailed List Of Forklift Operator Salaries By State.
|Cost Of Living||135.9|
What happens if you fail a forklift test?
If You Fail One or Both of the Forklift Certification Tests, You Can Retake It. Yes, definitely! You can retry taking or repeat the test you failed. The training school or instructor may ask you to pay again, this is because the time and paper materials they have to spend for your retake.