In a typical warehouse setup with an even floor surface, the forks should be above the ground at a height of 5 to 10 centimeter. This height is the same as it needs to go through a wooden pallet. In outdoor and in a rough surface, the forks should be a bit higher to prevent from the forks from digging in the ground.
What is the standard height of a forklift?
Most standard forklifts can reach heights between 10 and 15 ft, but special forklifts like the telehandler can lift as high as 55 ft depending on the telehandler size you select.
What is meant by collapsed height in relation to a forklift?
Lowered Height or Collapsed Height: Height from the floor to the top of the mast when it is lowered. Extended Height: the height to the top of the mast or load guard when mast is fully extended.
What is mast height in forklift?
Forklift Mast Types
Lift Height: (also known as maximum fork height or MFH) tells you how high the forks will be with the mast fully extended. When choosing a forklift mast, add at least six inches to the height of your topmost racking shelf.
How much clearance does a forklift need?
Calculating 12 inches of clearance will help to ensure you have enough space to accommodate your forklift’s turn radius, so you can turn in the aisle and help protect against potentially unsafe situations resulting from operator error.
What are the 7 classes of forklifts?
The 7 Classes of Forklift Trucks
- Class 1: Electric Motor Rider Trucks.
- Class 2: Electric Motor Narrow Aisle Trucks.
- Class 3: Electric Motor Hand or Hand-Rider Trucks.
- Class 4: Internal Combustion Engine Trucks—Cushion Tires.
- Class 5: Internal Combustion Engine Trucks—Pneumatic Tires.
How high is a 2 stage forklift?
A typical two stage mast for a forklift with a capacity from 2,000 lbs. to 6,000 lbs. will have approximately 130″ of maximum lift and will be around 83-88″ Overall Height Lowered (OAHL). Two stage masts are very common in high capacity forklifts of 15,000 lbs. and up.
What is free lift height?
A forklift’s free lift is the maximum height you can raise the forks without changing the mast height. There are two instances where this typically happens: when the inner mast rails extends past the outer mast rails or when the load backrest or carriage exceeds the height of the outer mast rails.
What is a low profile forklift?
Affordable and lightweight with a lifting capacity of 4000 pounds, this specialized low clearance unit adds value where other forklifts can’t. The Low Profile Series has standard features that include side shift, strobe light, smart backup alarm, and corrosion resistant features.
What is the standard forklift fork width?
Fork Width – Fork width is commonly 4-inches for Class II, 5-inches for Class III, and 6-inches for Class IV. This keeps them within their capacity limits for their classes. Of course, some people will need narrower forks or wider forks depending on the application.
How heavy is a forklift?
The average automobile weighs approximately 3,000 lbs and the average forklift weighs close to 9,000 lbs.
Is a telehandler a forklift?
Technically speaking, a telehandler is considered a (ITA*) class 7 powered industrial truck, which means it is a rough terrain forklift, but a forklift in name only.
How high does a 4 stage forklift go?
A fourth type, the quad mast or 4-stage, offers lift heights up to 22 feet. These are less common and only used in specialized warehouse applications. Single-Stage Mast – Typically used in applications where overhead clearance is not a concern, such as outdoor environments.
What’s the fulcrum point of a forklift?
The Forklift Fulcrum
The fulcrum is the central pivot point of a seesaw. The front axle is the fulcrum of the forklift where the counterweight and the load find balance.
What is a pantograph on a forklift?
The pantograph forklift is designed with scissor reach mechanism that allows the operators to lift, reach and place various loads with less effort. These forklifts are highly beneficial for operations where thin forks are needed for handling pallets efficiently. …
What is the minimum clearance between pallets and a racking structure?
Set and enforce adequate handling clearances between pallet loads and the racking frame around them. SEMA specifies a minimum clearance of 75mm between the top of the load and the beam above and on each side. These are absolute minima and the more clearance you can allow, the safer your operation.