According to the Occupational Safety & Health Administration (OSHA), a standard forklift capacity plate is a nameplate that contains the capacity of the lift truck, where the capacity is defined as “the manufacturer’s guideline for how much weight a forklift can safely lift.”1 The nameplate contains a host of …
How do you read a forklift capacity plate?
Max Lifting Height: The maximum lift height based on load centers. Load Center: This number indicates how far forward from the mast the balancing point of the load is. The further it is from the center, the less weight it can withstand. Back Tilt: The maximum degree of back tilt (tilting the load towards the operator).
What is a rated capacity plate forklift?
To achieve this, forklifts are equipped with a nameplate, also called the data plate or forklift capacity plate. The data plate includes vital information about the forklift, such as its fuel type, weight, and forklift load capacity.
What does the nameplate on a forklift tell you?
Sometimes referred to as a capacity plate or a forklift nameplate, the forklift data plate includes important information such as weight, fuel type, and forklift load capacity. Associates need to read the data plate during training and before use to help build the culture of safety in your facility.
What is a rated capacity plate?
What is a load capacity data plate? The load capacity data plate specifies the load each forklift can safely lift at different mast angles or when it is fitted with an attachment. The plate should display; the load capacity, lift height, load centre distance, brand and model number.
What are the 3 most important pieces of information found on a capacity plate?
One cannot know the safety limitations of a forklift capacity plate if they cannot read it. The plate must have certain safety details. Some important safety details include: maximum capacity, load center, maximum fork height and truck weight. The forklift operator must be trained on how to read the capacity plate.
How much weight can a 10k forklift lift?
|Max. Lift Height:||At Reach Length:||Lift Capacity:|
|34 feet Vertical||14 feet Extended||10,000 lbs.|
|38 feet Vertical||18 feet Extended||8,000 lbs.|
|44 feet Vertical||24 feet Extended||6,000 lbs.|
|55 feet Vertical||29 feet Extended||5,000 lbs.|
What must you check before using an attachment on a forklift?
The following checks must be made before using an attachment on a forklift:
- The attachment must suit the truck you are fitting it to, and must be suitable for the type of load you are lifting.
- It must be properly attached to the forklift with a suitable locking device.
Which side of the forklift is supporting more weight?
Weight distribution refers not only to the weight of the load, but also the weight of the forklift itself. An empty forklift has most of its weight in the rear, but when a load is placed on the lift, the weight distribution moves forward.
What is the center of gravity on a forklift?
According to OSHA, “The load center is the distance from the face of the forks to the load’s center of gravity.” It is important for operators and managers to understand the forklift load’s center of gravity in order to operate and transport loads safely in their operations.
When picking up a load the correct fork spacing should be?
Answer Expert Verified. When picking up a load, the correct fork spacing must be spaced in an evenly manner in which the centre stringer of the pallet and the balance of the load should be spaced evenly in which makes the picking up the load to be correct and well-balanced.
What is the best way to handle an uneven load?
Tilt the load against the backrest. If the load is unstable, lift the load slightly first, then carefully tilt it back so that the load stays tight against the backrest. If it’s a stable load and secure on the pallet, tilt first, then lift. Once the load is lifted, lower it to a safe traveling height.
When driving a forklift its forks should be at what height?
Keep the forks 6 to 10 inches above the ground to avoid potential hazards on the ground. Remember that forklifts are top-heavy. Carry the load low and tilted back.
When a lift truck is turning Is it more stable loaded or unloaded?
How should you raise the load? When a load is raised, the lift truck is less stable. … Attend the controls of the forklift truck when a load is elevated. In other words, the operator must stay on the forklift when the load is in a raised position.
What is the maximum weight a forklift can carry?
Forklift capacities range from about 3,000 lbs up to more than 70,000+ lbs. You can find the rated capacity of a forklift on its data plate. OSHA requires “only loads within the rated capacity of a truck shall be handled.” It’s easy to think the rated capacity is the same as maximum capacity, but it’s not that simple.
What is a rated capacity?
“Rated Capacity” is defined in the UN Model Regulations as follows: Rated capacity means the capacity, in ampere-hours, of a cell or battery as measured by subjecting it to a load, temperature and voltage cut-off point specified by the manufacturer.