It is important to note that it is possible to use your scissor lift whilst the battery is being charged. All you need to do is pull the red emergency shut-off button out and have a helper guide the extension cord away from the wheels whilst the equipment is moving.
Can you drive a scissor lift while charging?
It is possible to operate the lift while it is being charged. Pull the red emergency shut off button out and have an assistant guide the AC extension cord away from the wheels while moving.
How long do scissor lifts take to charge?
How Long Does It Take for a Scissor Lift to Charge? All scissor lifts are slightly different, but the main rule of thumb is allowing your scissor lift to charge for at least 6 hours before you can get the full life out of it the next day.
Do scissor lifts have power outlets?
Many newer scissor lifts have a power receptacle at the base of the lift for an extension cord. Do not tie them to the lift. Do not place them where they could become cut or abraded. Use caution when raising the platform to avoid tangling them in the moving parts.
Do you have to be tied off in a scissor lift?
Answer: No, neither §1926.451 or §1926.452(w) require employees to be tied-off when working from scissor lifts that have properly maintained guardrails.
How long does a scissor lift battery last?
Lifespan depends on battery usage, most batteries last from 6 to 48 months, just 30% of each battery survived this average. A good and lightly used battery can last up to 15 years.
Where are Skyjack scissor lifts made?
After launching Quest2013, the company received entries from places as far away as Latvia, India, Argentina, Germany and other countries from around the world. To its surprise, the oldest working unit was found less than four kilometers from Skyjack’s factory in Guelph, Ontario, Canada.
How much does a Genie scissor lift weight?
|Capacity||500 lb | 227 kg|
|Machine Width||2 ft 6 in | 0.76 m|
|Machine Length||6 ft | 1.83 m|
|Weight||3,209 lb | 1,456 kg|
What does it take to tip over a scissor lift?
a) When elevated over its base of support, the work platform of a scissor lift creates a long lever arm; a small amount of sidewise or horizontal force on the raised platform can place enough force on the base to cause a tip-over.
How high will a scissor lift go?
Depending on the model, expect a scissor lift to extend from ten to sixty feet. However, most scissor lifts have working heights that range from 20 to 40 feet. Scissor lifts tend to have less vertical elevation than other types of aerial lifts.
How much weight can a scissor lift lift?
A 19-foot scissor lift with a maximum working height of 25 feet and a lift capacity of 500 pounds will weigh approximately one ton. A 26-foot lift with a maximum platform weight capacity of 800 pounds and a maximum platform height of 25.5 feet can weigh as much as 4,700 pounds.
Can you exit a scissor lift at height?
In particular, §1926.501(b)(1) requires fall protection at 6 feet above a lower level. A worker may enter or exit an aerial lift (at heights above 6 feet) provided that fall protection such as guardrails or a fall arrest system is used while the worker moves between the lift and the working surface.
Can anyone use a scissor lift?
Yes, you do. Scissor lifts can be dangerous and can cause accidents leading to personal injuries as well as structural and equipment damage. Current regulations state that all personnel who work with or near scissor lifts must be trained and licenced.
Are scissor lifts dangerous?
Scissor lifts can be especially dangerous if used improperly. … When aerial work platforms are used correctly, they are not dangerous. Often times they are set up on uneven ground that is not suitable for equipment that carries the risk of tipping.